1. Home
  2. Blog
  3. Drone cleaning basics
Drone cleaning basics

Before and After: What a Drone Wash Can and Cannot Fix

A drone wash removes dirt, algae, pollution film and bird mess, but it cannot reverse etched glass, oxidized paint or sealant that has already failed.

Before and After: What a Drone Wash Can and Cannot Fix
Short answer

A drone wash removes what sits on a surface: dirt, dust, algae, pollution film and bird mess. It cannot repair the surface itself. Etched glass, oxidized or faded paint and failed sealant will look the same after cleaning, only cleaner. Before-and-after photos document both the improvement and anything that needs repair.

Clean and damaged are two different things

Most disappointment with exterior cleaning comes from one mix up. A wash removes things that are on the surface. It does not change the surface.

If a mark is a deposit, such as dust or algae, it can come off. If a mark is a change in the material, such as a scratch, a faded coating or a chemical burn in the glass, it will still be there afterward. Often it is easier to see, because the dirt that was hiding it is gone.

Knowing which is which before the job starts makes the after photos a pleasant surprise instead of an argument.

What a drone wash removes

A drone washes with deionized water and a safe cleaning solution. That combination works well on the everyday soiling that makes a building look tired.

  • Dust, pollen and windblown grit.
  • The gray film left by traffic and city air.
  • Rain streaks and dried runoff lines below sills and ledges.
  • Green algae and dark mildew on shaded walls and roofs.
  • Bird droppings on glass, ledges and signage.
  • Cobwebs and insect marks around lights and frames.
  • Light salt haze on buildings near the coast.

What may need a second pass

Some soiling sits between easy and impossible. It will usually improve a great deal on the first wash and may need another visit to finish.

Thick growth that has been left for a long time is one example. Droppings that have baked on through a hot season are another. Rust colored runoff below metal fixings, dark staining under a leaking gutter, and heavy buildup on a building that has gone a long time without cleaning can all leave a faint shadow after one pass.

A careful crew will tell you this at the pre-inspection instead of promising a perfect result from a single flight.

What cleaning cannot fix

These are surface failures. No wash, by drone or by hand, reverses them.

  • Etched glass. Minerals from hard water or runoff from concrete can bond with glass over time and leave a cloudy, rough stain. It needs restoration polishing or new glass.
  • Scratches and pitting in glass, including marks left by construction work.
  • Oxidized paint and coatings. A chalky, faded panel has lost part of its finish. Washing removes loose chalk and dirt, but the color does not return without refinishing.
  • Failed sealant. Cracked, shrunken or peeling joints need to be replaced, and a wash will not close a gap.
  • Fogged double glazing. Moisture between the panes is inside the sealed unit, out of reach of any exterior clean.
  • Rust and corrosion in the metal itself, as opposed to rust stains on top of it.

How to tell the difference before you book

You can do a rough check from a reachable window or a ground floor panel. Wet the mark and wipe it with a soft cloth. If it fades or smears, it is a deposit and should respond to washing. If it looks exactly the same wet or dry, or you can feel roughness in the glass, it is likely damage.

Rub a faded panel with a clean finger. A powdery residue the color of the paint points to oxidation. Look at the joints around windows too. Sealant that has pulled away from the edge is a repair item, not a cleaning item.

Share what you find. The pre-inspection is where the crew confirms it and sets expectations for each surface.

How before-and-after photos document the job

Photos turn opinions into a record. Drone Sky Cleaners takes before-and-after photos as part of every job, alongside the pre-inspection and the final inspection.

Good documentation uses the same viewpoint for both shots, with similar light where possible, so the comparison is fair. Before photos also capture any damage that was already there. That protects the owner and the crew, because nobody has to guess later whether a scratch or a failed joint was caused by the clean.

For a property manager, the set is useful beyond the day itself. It shows owners and tenants what was done. It gives a baseline for the next clean. It also becomes a simple condition report for parts of the building nobody normally sees up close.

Using the results to plan what comes next

After photos often reveal a short repair list: a few joints to reseal, a panel to refinish, a pane to restore. Hand that list to your maintenance contractor while it is fresh.

Then set the cleaning rhythm. Deposits that are washed off regularly have less time to turn into permanent marks. Booking the next clean at the end of each job keeps that from slipping. Weather and wind can still move a date, so leave some room in the plan.

Common questions

Why do my windows still look cloudy after cleaning?

If the glass is clean and still hazy, the cause is usually etching from mineral deposits, or moisture trapped inside a double glazed unit. Neither is dirt. A glass restoration specialist or glazier can confirm which one you have.

Can I see before-and-after photos of my own building?

Yes. Photos are taken before and after the clean as a standard step and shared as part of the job. Ask for specific areas to be included, such as a problem wall or a roof section you cannot see from the ground.

Will a drone wash make old paint look new?

It will make it look clean. Dirt, streaks and growth come off, and the true color shows again. If the coating itself has faded or turned chalky with age, washing cannot restore it, and repainting or refinishing is the remedy.

Contact

Fill the form below to get started

Send the building details and we'll come back with a quote.

(647) 361-5616[email protected]
1001 Finch Ave W, Toronto, ON M3J 2C7

Free quote request

Takes about a minute.

CallGet a Free Quote