High-Rise Cleaning
Drone-assisted cleaning for high-rise and skyscraper windows and facades, with no scaffolding or risky rope work. Deionized water, a safe cleaning solution and a power wash.
Learn more →Drone window, facade and roof cleaning in Connecticut. No scaffolding or lifts, deionized water, and the pilot stays on the ground.

ConnecticutRoad salt and freeze-thaw cycles leave winter grime on lower facades, salt air off Long Island Sound reaches shoreline buildings, and heavy tree pollen and damp summers encourage algae. Corporate office towers in Stamford and Hartford's insurance district, Yale's campus and hospital buildings in New Haven, shoreline condominiums, and the large casino resorts in the southeast of the state. A cleaning drone washes windows, cladding and roofs with purified water and a safe cleaning solution while the pilot stays on the ground, so there is no scaffolding, swing stage or lift to set up. Work in Connecticut is carried out by our own crews or a local Drone Sky franchise partner, so ask for a quote and we will confirm dates and availability for your building.
Drone window cleaning in Connecticut is priced per building after we look at its height, glass area and access. Commercial drone work in the United States is flown under FAA Part 107: a certified remote pilot, a registered drone and, in controlled airspace near airports, FAA authorization before the flight. We check wind and weather on the day, protect the area below and send before-and-after photos when the clean is done. We take requests from Bridgeport, New Haven, Stamford, Hartford and Waterbury.

Six kinds of building, one method: a drone, deionized water and a pilot who never leaves the ground.
Drone-assisted cleaning for high-rise and skyscraper windows and facades, with no scaffolding or risky rope work. Deionized water, a safe cleaning solution and a power wash.
Learn more →Regular cleaning for office buildings, warehouses, energy plants, hotels, monuments, solar farms and more.
Drones clean exterior windows and roofs of homes for a streak-free shine and a revived look.
Learn more →Faster and safer on mid-rise buildings, and able to reach windows that are otherwise hard to get to.
Storefronts cleared of dirt, grime and streaks so the shop looks inviting to customers.
Commercial garages and parking facilities washed down, removing dirt, grime and streaks.
Drag the slider. Same dome roof, before and after a drone wash. No scaffolding went up and nobody left the ground.

BeforeAfterEvery job follows the same checklist, from the first look at the building to booking the next clean.

Before the cleaning process begins, a thorough inspection of the building's windows is conducted. This assessment helps identify any particularly dirty or hard-to-reach windows, as well as potential obstacles or hazards that the drone needs to navigate around.
A flight plan is developed, taking into consideration factors such as wind conditions, weather, and the layout of the building. The flight path is programmed to ensure efficient coverage of all windows.
Safety is paramount during drone operations. The area around the building is cordoned off to prevent unauthorized access and protect pedestrians. In some cases, traffic control might be necessary to ensure the safety of passersby.
The drone is flown to the target windows. As it approaches each window, the cleaning mechanisms are activated. Brushes scrub the surface of the window, dislodging dirt and grime, while water jets rinse away the debris. Depending on the level of dirt, environmentally friendly cleaning solutions might be used to enhance the cleaning process.
After the cleaning process is complete, a final inspection is conducted to ensure that all windows are sparkling clean and streak-free.
After finalizing the cleaning job, we then focus on scheduling the next clean. Depending on how large the property is, and its susceptibility to get dirty, will determine when the next clean is booked.
"This is honestly a MUST. Not only is the cost of the window cleaning significantly cheaper than traditional methods, the chemicals used are safer, and the job gets done way faster.. Its a no brainer"
Launch your own drone cleaning company on a model built to get you operating: apply, get approved, and we guide you through launch.

Drone cleaning in Connecticut is priced per building after we look at its height, glass area and access. Ask for a quote and we will confirm dates and availability.
Commercial drone work in the United States is flown under FAA Part 107: a certified remote pilot, a registered drone and, in controlled airspace near airports, FAA authorization before the flight.
Windows, curtain wall, cladding and roofs on high-rise, mid-rise, industrial, retail and residential buildings, plus parking garages.
Work in Connecticut is carried out by Drone Sky Cleaners crews or a local Drone Sky franchise partner.
We wash with deionized water and a safe cleaning solution. Deionized water dries without spots or streaks.
Franchise applications are open. See Drone Cleaning Franchise Connecticut.
Send the building details and we'll come back with a quote.
Takes about a minute.
Thanks. We'll look at the building and get back to you with a quote.
